Concrete & Paving Cost in 20 US Cities (2026)
Concrete work including driveways, patios, walkways, and foundations.
National Average (per project)
Low
$2,000
Average
$5,500
High
$10,000
Concrete & Paving Cost Breakdown
| Item | Description | Low | High | Unit |
|---|---|---|---|---|
| Concrete | Ready-mix concrete delivered and poured | $3 | $6 | per sqft |
| Reinforcement | Rebar, wire mesh, or fiber reinforcement | $0.3 | $1 | per sqft |
| Gravel base | Compacted gravel sub-base preparation | $0.5 | $1.5 | per sqft |
| Forms & finishing | Forming, finishing, joints, and curing compound | $0.5 | $2 | per sqft |
| Decorative finish | Stamping, coloring, or exposed aggregate (optional) | $0 | $4 | per sqft |
| Labor | Concrete crew (forming, pouring, finishing) | $3 | $6 | per sqft |
| Demolition (if replacing) | Break-out and haul-off of old concrete | $0 | $3 | per sqft |
* These are national average costs. Actual prices vary by city — select a metro below for local estimates.
Concrete work including driveways, patios, walkways, and foundations.
Concrete & Paving Cost by City
Houston, TX
per project
$5,225
$1,900–$9,500
Dallas, TX
per project
$5,335
$1,940–$9,700
Phoenix, AZ
per project
$5,115
$1,860–$9,300
San Antonio, TX
per project
$4,840
$1,760–$8,800
Austin, TX
per project
$5,610
$2,040–$10,200
Fort Myers, FL
per project
$5,280
$1,920–$9,600
Charlotte, NC
per project
$5,170
$1,880–$9,400
Nashville, TN
per project
$5,280
$1,920–$9,600
Raleigh, NC
per project
$5,225
$1,900–$9,500
Boise, ID
per project
$5,060
$1,840–$9,200
Tampa, FL
per project
$5,225
$1,900–$9,500
Denver, CO
per project
$5,775
$2,100–$10,500
Atlanta, GA
per project
$5,335
$1,940–$9,700
Orlando, FL
per project
$5,170
$1,880–$9,400
Jacksonville, FL
per project
$5,005
$1,820–$9,100
Las Vegas, NV
per project
$5,390
$1,960–$9,800
Salt Lake City, UT
per project
$5,280
$1,920–$9,600
Columbus, OH
per project
$4,950
$1,800–$9,000
Indianapolis, IN
per project
$4,895
$1,780–$8,900
San Diego, CA
per project
$6,490
$2,360–$11,800