HomeCostGuide

How Much Does Tile Installation Cost in Denver, CO?

Updated March 2026 · Denver metro area · Based on BLS wage data and local market costs

Denver Average Cost (per project)
Low
$1,050
Average
$2,625
High
$5,250
BudgetMid-RangePremium

Itemized Cost Breakdown

Estimated for Tile area (sq ft): 150 sqft · Mid-Range tier · Local cost index: 1.05x

Line ItemLowMidHigh
Tile material
Ceramic, porcelain, or natural stone tile
Shop Tile
$315$1,339$2,363
Thinset & grout
Modified thinset mortar and sanded/unsanded grout
Shop Tile
$79$158$236
Backer board
Cement backer board for wet areas
Shop Tile
$47$87$126
Waterproofing membrane
Liquid or sheet membrane for showers/wet areas
$0$158$315
Trim & transitions
Bullnose tile, Schluter strips, transition pieces
Shop Tile
$47$142$236
Substrate preparation
Floor leveling, crack isolation, membrane
$39$99$158
Labor
Tile setter (layout, cut, set, grout, seal)
$630$1,103$1,575
Total Estimated Cost$1,157$3,083$5,009

Costs adjusted for local market conditions. Actual prices vary based on project specifics, contractor, and material choices.

Affiliate Disclosure: Some product links on this page are affiliate links. If you purchase through these links, we may earn a small commission at no additional cost to you. This helps support our free cost guides. We only link to retailers we trust. Learn more about our methodology.

Cost Calculator

Adjust project size and material tier to estimate your cost.

30450
Your Estimated Cost
Low
$1,157
Average
$3,083
High
$5,009
View itemized breakdown
ItemLowHigh
Tile material$315$2,363
Thinset & grout$79$236
Backer board$47$126
Waterproofing membrane$0$315
Trim & transitions$47$236
Substrate preparation$39$158
Labor$630$1,575
Total$1,157$5,009

Estimates based on local cost data. Get quotes from licensed contractors for accurate pricing.

What Drives Tile Installation Cost in Denver?

The average cost of tile installation in Denver, CO is $2,625 per project. Most homeowners pay between $1,050 and $5,250, depending on the scope of work, materials selected, and contractor experience.

Installation of ceramic, porcelain, or natural stone tile for floors, walls, and backsplashes.

Local Labor Costs

Construction workers in Denver earn an average of $25.3/hr 11% above the national average. Labor typically accounts for 40-60% of total project cost.

Materials in CO are subject to 8.77% sales tax, which adds to the overall project cost. For a $2,625 project, expect roughly $92 in tax on materials alone.

Denver issued approximately 17,600 residential building permits in 2023, putting it in the upper range of US construction markets. High permit activity can mean busier contractors and longer wait times for scheduling.

Factors That Affect Cost

  • Square footage
  • Tile type
  • Pattern complexity
  • Substrate prep
  • Grout selection
  • Contractor experience — Established contractors with strong reviews may charge 10-20% more
  • Local cost of livingDenver's cost index is 1.05x the national baseline

Best Time for Tile Installation in Denver

Denver has cold winters with snow and dry, sunny summers. The building season is May through October. Spring snowstorms can delay early-season projects. High altitude affects concrete curing.

Best Months

May, Jun, Jul, Aug, Sep

Lower demand often means better pricing and faster scheduling.

Peak Season (Higher Prices)

Dec, Jan, Feb

High demand can add 10-20% to project costs.

Monthly Weather in Denver

MonthJanFebMarAprMayJunJulAugSepOctNovDec
Avg High45°48°56°62°72°83°90°87°79°66°52°44°
Avg Low16°19°27°34°43°52°58°57°47°35°24°16°
Rain (in)0.50.51.31.72.31.82.21.81.310.80.5

Source: Open-Meteo historical data (2024)

Licensing & Permits in CO

Colorado does not require a state-level general contractor license. Denver and most jurisdictions require local contractor licensing. Plumbing, electrical, and mechanical trades require state licenses.

Verify a contractor's license at Colorado Department of Regulatory Agencies.

How to Save Money on Tile Installation

  • Get at least 3 quotes from licensed contractors in Denver
  • Schedule during off-peak months (May, Jun, Jul, Aug, Sep) for lower prices
  • Clarify permit costs upfront — they vary by jurisdiction
  • Consider mid-range materials for the best value-to-quality ratio
  • Verify contractor licensing through Colorado Department of Regulatory Agencies
  • Ask about material package deals or contractor supplier discounts

Frequently Asked Questions

How much does tile installation cost per square foot?
Labor runs $5-15 per sq ft. Total installed cost including material is typically $10-30 per sq ft.

Tile Installation Cost in Other Cities

Other Costs in Denver

Ready to Get Quotes?

Browse top-rated Denver contractors

Find Contractors