HomeCostGuide

How Much Does Tile Installation Cost in San Antonio, TX?

Updated March 2026 · San Antonio metro area · Based on BLS wage data and local market costs

San Antonio Average Cost (per project)
Low
$880
Average
$2,200
High
$4,400
BudgetMid-RangePremium

Itemized Cost Breakdown

Estimated for Tile area (sq ft): 150 sqft · Mid-Range tier · Local cost index: 0.88x

Line ItemLowMidHigh
Tile material
Ceramic, porcelain, or natural stone tile
Shop Tile
$264$1,122$1,980
Thinset & grout
Modified thinset mortar and sanded/unsanded grout
Shop Tile
$66$132$198
Backer board
Cement backer board for wet areas
Shop Tile
$40$73$106
Waterproofing membrane
Liquid or sheet membrane for showers/wet areas
$0$132$264
Trim & transitions
Bullnose tile, Schluter strips, transition pieces
Shop Tile
$40$119$198
Substrate preparation
Floor leveling, crack isolation, membrane
$33$83$132
Labor
Tile setter (layout, cut, set, grout, seal)
$528$924$1,320
Total Estimated Cost$971$2,585$4,198

Costs adjusted for local market conditions. Actual prices vary based on project specifics, contractor, and material choices.

Affiliate Disclosure: Some product links on this page are affiliate links. If you purchase through these links, we may earn a small commission at no additional cost to you. This helps support our free cost guides. We only link to retailers we trust. Learn more about our methodology.

Cost Calculator

Adjust project size and material tier to estimate your cost.

30450
Your Estimated Cost
Low
$971
Average
$2,585
High
$4,198
View itemized breakdown
ItemLowHigh
Tile material$264$1,980
Thinset & grout$66$198
Backer board$40$106
Waterproofing membrane$0$264
Trim & transitions$40$198
Substrate preparation$33$132
Labor$528$1,320
Total$971$4,198

Estimates based on local cost data. Get quotes from licensed contractors for accurate pricing.

What Drives Tile Installation Cost in San Antonio?

The average cost of tile installation in San Antonio, TX is $2,200 per project. Most homeowners pay between $880 and $4,400, depending on the scope of work, materials selected, and contractor experience.

Installation of ceramic, porcelain, or natural stone tile for floors, walls, and backsplashes.

Local Labor Costs

Construction workers in San Antonio earn an average of $20.5/hr 10% below the national average. Labor typically accounts for 40-60% of total project cost.

Materials in TX are subject to 8.13% sales tax, which adds to the overall project cost. For a $2,200 project, expect roughly $72 in tax on materials alone.

San Antonio issued approximately 16,800 residential building permits in 2023, putting it in the upper range of US construction markets. High permit activity can mean busier contractors and longer wait times for scheduling.

Factors That Affect Cost

  • Square footage
  • Tile type
  • Pattern complexity
  • Substrate prep
  • Grout selection
  • Contractor experience — Established contractors with strong reviews may charge 10-20% more
  • Local cost of livingSan Antonio's cost index is 0.88x the national baseline

Best Time for Tile Installation in San Antonio

San Antonio has mild winters and hot, humid summers. Outdoor projects are best scheduled for fall or spring. Flash flooding is common May through October.

Best Months

Oct, Nov, Mar, Apr, May

Lower demand often means better pricing and faster scheduling.

Peak Season (Higher Prices)

Jul, Aug

High demand can add 10-20% to project costs.

Monthly Weather in San Antonio

MonthJanFebMarAprMayJunJulAugSepOctNovDec
Avg High62°66°74°80°87°93°96°96°90°82°71°63°
Avg Low39°43°50°57°65°72°74°74°69°59°49°40°
Rain (in)1.71.822.44.34.522.43.23.82.72

Source: Open-Meteo historical data (2024)

Licensing & Permits in TX

Texas does not require a state-level general contractor license. San Antonio requires contractor registration. Specialty trades require state licenses.

Verify a contractor's license at Texas Department of Licensing and Regulation.

How to Save Money on Tile Installation

  • Get at least 3 quotes from licensed contractors in San Antonio
  • Schedule during off-peak months (Oct, Nov, Mar, Apr, May) for lower prices
  • Clarify permit costs upfront — they vary by jurisdiction
  • Consider mid-range materials for the best value-to-quality ratio
  • Verify contractor licensing through Texas Department of Licensing and Regulation
  • Ask about material package deals or contractor supplier discounts

Frequently Asked Questions

How much does tile installation cost per square foot?
Labor runs $5-15 per sq ft. Total installed cost including material is typically $10-30 per sq ft.

Tile Installation Cost in Other Cities

Other Costs in San Antonio

Ready to Get Quotes?

Browse top-rated San Antonio contractors

Find Contractors